McClunie Holdings Inc.

P.O. Box 57
Wildwood, AB  Canada
T0E 2M0

PH:  (780) 325-2041
FX:  (780) 325-2072

Contactus today for more
information or to set up a
demonstration.

 

Features of Basic Setup:
  • Bolt to wall or free stand
  • Lumber or 14g steel used for bottom of components.
  • Parts interchangeable
  • Top half of componets...open bars, sold or mesh.
  • Easy rolling top tracks - new bottom track (extra strength).
  • Components all clamp together with no gap.

  • 3 standard design variations

  • Systems made up of:
    - 96", 72" & 66" sliding doors
    - 96", 72" & 66" swing doors
    - 66" sweep
    - 96" & 66" spreaders
    - 96" & 66" panels
  • Constructed with 2" square tubing and 2" round pipe crossbars
  • 9ft clearance for velvet and hard horn bulls

 

 

Options
  • Combination panel swing components
  • Custom design components
  • Custom design systems
  • Curved panels

 

System No. 1

This system is designed to fit in a 40'x 40' building.  The system is bolted to the building wall on side "A" and "B".

Package 1.jpg (33462 bytes)

 

System No. 2

This stystem is designed to fit in a 40' x 40' building.  The system is bolted to the building wall on side "A" and "B".

Package 2.jpg (35545 bytes)

 

 

 

 

 

 

 

System No. 3

This system is designed to fit in a 40'x 40' building.

Package 3.jpg (36149 bytes)

 

Starter Package

The starter package consists of the following:
- 3 x sliders
- 2 x swing doors
- 4 x panels
- 1 x cow box

Package 4.jpg (4883 bytes)

 
Page last updated Tuesday, November 23, 2004 12:59 AM

Site designed and maintained by Ranchernet.com. Copyright 2000, all rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.